CONSENSE
Consense Ltd is a contract software & electronic hardware development company in the field of industrial and home automation.
Our main goal is to make complicated things simpler and to place them at the service of people.
We work hard on the creation and production of smart, reliable and high-quality computer systems and solutions.
UKTN-1 - Universal controller for heat pump machines
A hot heart and a cold brain for your energy-efficient heating system!

Universal controller for heap pump UKTN-1 is hardware&software control system designed for be a central control unit for HVAC installations («Heating, Ventilation, & Air Conditioning») with a heat pump inside.
Areas of application:

  • Heating, conditioning and heat water supply for apartment houses;
  • Heating, conditioning and heat water supply for industrial and business buildings;
  • Ventilation recuperators with air heating by heat pump and/or central water heating;
  • Air dehumidifiers for swimming pools with heating by heat pump, electrical heaters or central water heating.

Adapter for compressor driver DAHUA PS2176X
dahua_ad

Adapter for compressor driver DAHUA

Place online order...
Let's spin everything!

Auxiliary equipment - DAHUA Compressor Driver Adapter - allows you to connect a DAHUA PS2176X compressor driver to the UKTN-1 controller via RS485. DAHUA PS2176X compressor driver has a non-standard TTL interface and a specific proprietary exchange protocol.

The adapter provides protocol conversion, galvanic isolation of interfaces. It also forms low-voltage power for the driver board.

Impulse Interference Protection Filters for 1wire temperature sensors (DS18b20)
1WireFilter

1wire Filter

Order 1wire Filters...
Impulse Interference Protection Filters for 1wire temperature sensors (DS18b20)

Auxiliary equipment - Impulse Interference Protection Filters for 1wire temperature sensors (DS18b20) - allow temperature sensors to work in conditions of excessive interference from the BLDC compressor and it's driver.

Filters are installed on the cable between the sensor and the controller at a distance of 10-20 cm from the sensor. It's also possible to install filter directly inside the sensor enclosure.

1-Wire Temperature Sensors (DS18b20) with integrated Filters
1WireSensor

1Wire Temperature Sensors

Order sensors...
1-Wire Temperature Sensors (DS18b20) with integrated Filters

Temperature Sensors (DS18b20) with integrated Filters provide stable operation in the conditions of impulse interference from a BLDC compressor. The only drawback compared with Chinese sensors is the increased cost. Everything else - the benefits:

  • 6x50mm stainless steel sleeve;
  • Copper wire double-insulated shielded signal cable;
  • Original DS18b20 chips from a reliable supplier;
  • Built-in impulse interference filter;
  • Multi-level moisture protection, providing a level of protection "IP68" at least;
  • Heat sink compound to ensure reliable thermal contact of the metal sleeve and the sensor body;
  • Testing each sensor during production for 1 hour at temperatures of -15 and +100 °С.
Standard cable lengths: 1 and 2 м. Other required cable lengths (up to 15м) should be specified in the order request.

UKTN-2 - Univeral controller for heat pump machines (h/w ver.2, dev. in 2019)
UKTN-2 - Univeral controller for heat pump machines (h/w ver.2, dev. in 2019)

Key features of new device:

  • Increased performance and flexibility through the use of a Linux-powered single-board computer (SBC);
  • Communication interfaces: Ethernet, WiFi;
  • Ability to install a built-in submodule of GSM / GPRS modem;
  • All discrete outputs are designed to control external electromechanical or solid-state relays;
  • A block of external electromechanical relays with integrated spark circuits, carried outside the main body, provides additional flexibility and surge immunity of the system;
  • RMS-meters of 3-phase power voltages (increased measurement accuracy and noise immunity);
  • Flexible configuration of inputs and outputs;
  • Ability to add your own custom control algorithms.


R&D

Contract Research and Design...

More about R-&-D...
Contract development: Let your dreams come alive with us!

The company provides services of contract developement of electronic hardware, embedded and applied software and integrated system solutions.

Main areas of our expertise:

  • Automation devices and solutions;
  • Automatic control systems;
  • Measurements;
  • Test stands.

After contract development you will get as a result a full complect of technical documentation and fully functioning prototypes according to the Technical Requirements.

Also our company is ready to provide expert judgement and testing of Customer's documentation, equipment and software and manufacturing of small and middle-size sets of electronic equipment according to the documentation.



Consense © 2013-2019